手順19に変更
手順ライン
| + | [title] Reassembling the display |
|---|---|
| + | [* black] Prepare the VHB Double Sided Heavy Duty Mounting tape for reassembly. |
| + | [* black] Using a perfectly cleaned nylon cutting board, place a 12" strip of tape on the board. |
| + | [* black] Using a sharp razor knife and a straight edge guide, cut a 6mm strip off each side. |
| + | [* black] Place a 17" piece of tape on the cutting board and cut it lengthwise down the center. |