| + | [* black] After removing the screen remove the remnants of the tape from the bezel in preparation for reassembly. |
|---|
| + | [* icon_note] Take great care to not touch the clear digitizer glass with hands or tape adhesive. |
|---|
| + | [* icon_note] Using nitrile, latex, or vinyl gloves will keep fingerprints from the display. |
|---|
| + | [* black] Apply hot air to loosen the bond. Too much heat will allow spots of adhesive to stick to the bezel. |
|---|
| + | [* black] Use a spudge to start lifting the tape, then grip with your fingers to pull the tape up. |
|---|
| + | [* black] Use a tacky portion of the old tape to lift off adhesive remaining in the tape channel. |
|---|
| + | [* black] Use a cotton swab moistened with isopropyl alcohol to thoroughly clean any remaining tape from the tape channel. |
|---|