| - | [* black] Make sure the Pro Data chassis is disconnected from power and Thunderbolt, then set it upside down on an anti-static mat or flat surface with appropriate protection from electrostatic discharge. |
|---|
| - | [* light_blue] Using a #1 Philips screwdriver, remove the two screws securing the service panel into place. |
|---|
| + | [* black] Make sure Pro Data is disconnected from power and Thunderbolt, then set it upside down on an anti-static mat or flat surface with appropriate protection from electrostatic discharge. |
|---|
| + | [* light_blue] Using a #2 Phillips screwdriver, remove the two screws securing the service panel into place. |
|---|