Skip to main content

Changes to Step #3

Edit by Jay Iuliano

承認済みの編集 by Jay Iuliano

Deleted
Added
Unchanged

Step Lines

[* red] Remove the four 6.4 mm Phillips #1 screws holding the adapter to the outer case.
[* icon_note] Only remove the following screws if you are planning on taking apart the iPod Adapter in a later stepon:
[* icon_note] Only remove the following screws if you are planning on taking apart the iPod Adapter in a later stepon:
[* orange] Two 6.4 mm Phillips #1 screws near the center of the adapter. These screws have built in washers.
[* yellow] TheOne 4.0 mm Phillips #1 screw fromnear the center of the adapter.
[* yellow] TheOne 4.0 mm Phillips #1 screw fromnear the center of the adapter.
[* black] The iPod adapter should now be separate from the upper casing.