メインコンテンツにスキップ

手順3に変更

Christopherさんによる編集

承認済みの編集 : Christopher

削除済み
追加
変更なし

手順ライン

[* red] Using a Phillips #1 screwdriver, removeRemove the four 6.4 mm Phillips #1 screws holding the adapter to the outer case.
[* red] Using a Phillips #1 screwdriver, removeRemove the four 6.4 mm Phillips #1 screws holding the adapter to the outer case.
[* icon_note] Only remove the following screws if you are planning on taking apart the iPod Adapter in a later step:
[* orange] Remove the twoTwo 6.4 mm Phillips #1 screws near the center of the adapter. These screws have built in washers.
[* yellow] Remove theThe 4.0 mm Phillips #1 screw from the center of the adapter.
[* orange] Remove the twoTwo 6.4 mm Phillips #1 screws near the center of the adapter. These screws have built in washers.
[* yellow] Remove theThe 4.0 mm Phillips #1 screw from the center of the adapter.
[* black] The iPod adapter should now be separate from the upper casing.