メインコンテンツにスキップ

手順3に変更

Christopherさんによる編集

承認済みの編集 : Christopher

削除
追加
変更なし

手順ライン

[* red] RemoveUsing a Phillips #01 screwdriver, remove the six 1 xfour 1/4" screws holding the adapter to the outer case.
[* black] The pair of

[* icon_note] Only remove the following
screws if you are planning on taking apart the iPod Adapter in a later step:
[* orange] Use a Phillips #01 screwdriver to remove the two 1/4" screws near
the middle center of the adapteradapter. These screws have built in washers and are not interchangeable withwashers.
[* yellow] Use a Phillips #01 screwdriver to remove
the four surrounding screws5/32" screw from the center of the adapter.
[* red] RemoveUsing a Phillips #01 screwdriver, remove the six 1 xfour 1/4" screws holding the adapter to the outer case.
[* black] The pair of

[* icon_note] Only remove the following
screws if you are planning on taking apart the iPod Adapter in a later step:
[* orange] Use a Phillips #01 screwdriver to remove the two 1/4" screws near
the middle center of the adapteradapter. These screws have built in washers and are not interchangeable withwashers.
[* yellow] Use a Phillips #01 screwdriver to remove
the four surrounding screws5/32" screw from the center of the adapter.
[* black] The iPod adapter should now be separate from the upper casing.

画像1

古いバージョン

新しいバージョン

画像2

古いバージョン

新しいバージョン