メニュー

あなたの設定

手順2に変更

Jay Iuliano — さんによる編集

承認済みの編集 : Jay Iuliano

削除済み
追加
変更なし

手順ライン

[* black] Turn the iHome 180 degrees and carefully pull up on speaker cases to pry them loose from the bottom case.
[* icon_caution] Prying the Motherboard Assembly from the Upper Case will require a good amount of force, but pullingforce. Be very careful not to break the case, or yank on any of the ribbon wires attached to the underside.
[* black] Pulling outwards on the sides of the Upper Casing may help. Be careful not to break anything or yankcan help loosen the cablesassembly.
[* black] If it seems too difficult to remove, chances are that a screw is still attach the Motherboardattached. Make sure you've removed every screw listed before proceeding to the Upper Casethis step.
[* icon_caution] Prying the Motherboard Assembly from the Upper Case will require a good amount of force, but pullingforce. Be very careful not to break the case, or yank on any of the ribbon wires attached to the underside.
[* black] Pulling outwards on the sides of the Upper Casing may help. Be careful not to break anything or yankcan help loosen the cablesassembly.
[* black] If it seems too difficult to remove, chances are that a screw is still attach the Motherboardattached. Make sure you've removed every screw listed before proceeding to the Upper Casethis step.
[* black] Pull the back adapter cover off.