Skip to main content

Changes to Step #2

Edit by Christopher

承認済みの編集 by Christopher

Deleted
Added
Unchanged

Step Lines

[* icon_caution] Carefullyblack] Turn the iHome 180 degrees and carefully pull up on speaker boxescases to pry them loose from the bottom case. Wires attach
[* icon_caution] Prying
the undersideMotherboard Assembly from the Upper Case will require a good amount of force, but pulling outwards on the motherboard tosides of the upper case, and they willUpper Casing may help. Be careful not seperate completely at this timeto break anything or yank the cables that still attach the Motherboard to the Upper Case.
[* icon_caution] Carefullyblack] Turn the iHome 180 degrees and carefully pull up on speaker boxescases to pry them loose from the bottom case. Wires attach
[* icon_caution] Prying
the undersideMotherboard Assembly from the Upper Case will require a good amount of force, but pulling outwards on the motherboard tosides of the upper case, and they willUpper Casing may help. Be careful not seperate completely at this timeto break anything or yank the cables that still attach the Motherboard to the Upper Case.
[* black] Pull the back adapter cover off and set aside.
[* black] iHome has been rotated in the final picture to display all the wires you should be aware of.

Image 3

Deleted