メインコンテンツにスキップ

手順1に変更

Christopherさんによる編集

承認済みの編集 : Christopher

削除済み
追加
変更なし

手順ライン

[* black] Using a Phillips #02#2 screwdriver, remove the four screws attaching the top of the case to the motherboard.
[* red] Two 9.5mm9.5 mm Phillips #2 screws near the speaker grille.
[* orange] Two 14.3mm14.3 mm Phillips #2 screws that sit in recesses under the motherboard. Their positions are marked in orange in the pictures provided.
[* black] Using a Phillips #02#2 screwdriver, remove the four screws attaching the top of the case to the motherboard.
[* red] Two 9.5mm9.5 mm Phillips #2 screws near the speaker grille.
[* orange] Two 14.3mm14.3 mm Phillips #2 screws that sit in recesses under the motherboard. Their positions are marked in orange in the pictures provided.
[* icon_note] It is useful to use a screwdriver with a magnetic tip so you don't lose these screws within the device.