メインコンテンツにスキップ

手順1に変更

Nicholas Phillipsさんによる編集

編集が拒否されました。 : Jeff Suovanen

削除済み
追加
変更なし

手順ライン

[* black] TurnPlace laptop upside down.
[* black] Rotate so
the computer over ontobattery side is facing away from you.
[* black] Locate
the backRAM hardcover.
[* black] Use a Phillips head screwdriver toOnce located remove the single screw holding the RAM cover in place, and lift the coverplace.
[* red] One 4.0 mm coarse threadblack] Using the correct Phillips head screwdriver remove the screw.
[* black] Lift the cover at the tab upwards to remove the cover to get to the RAM.
[* black] TurnPlace laptop upside down.
[* black] Rotate so
the computer over ontobattery side is facing away from you.
[* black] Locate
the backRAM hardcover.
[* black] Use a Phillips head screwdriver toOnce located remove the single screw holding the RAM cover in place, and lift the coverplace.
[* red] One 4.0 mm coarse threadblack] Using the correct Phillips head screwdriver remove the screw.
[* black] Lift the cover at the tab upwards to remove the cover to get to the RAM.