メインコンテンツにスキップ

手順 2 への変更

- Courtney Steinbergによって編集

承認済みの編集 : Courtney Steinberg

削除
追加
変更なし

手順ライン

[* red] Remove the two Phillips #1 9.0mm screws on the back of the iHome.
[* orange] Repeat the previous step for the two 9.0mm screws on the bottom.
[* icon_caution] Carefully slide the back cover off. There are wires connected to the back cover.
[* icon_caution] Carefully slide the back cover off. There are wires connected to the back cover.