Xbox One Elite Wireless Controller Series 2 Disassembly手順の4履歴

手順4に変更

2022年2月25日 - justbeloebによって編集

編集が拒否されました。 : Kyle Smith

	[title] Separating the Front & Back
-	[* black] Remove the six T-8 Security screws holding the front and the back of the controller together. Note: one (highlighted green) is covered by a white paste/sticker that crumbles when removed; this lets you know if someone has previously disassembled your device.
+	[* black] Remove the six T-9 Security screws holding the front and the back of the controller together. Note: one (highlighted green) is covered by a white paste/sticker that crumbles when removed; this lets you know if someone has previously disassembled your device.
	[* black] Once the screws are removed, you can insert a spudger under a vibration motor to provide a little leverage to separate the front from the back of the device.
	[* black] The third image shows the front assembly removed from the back cover.