メインコンテンツにスキップ

手順2に変更

- Yutong Yinによって編集

承認済みの編集 : Yutong Yin

変更なし

手順ライン

-[* red] Locate the 7 screws which has been circled in the picture and remove them.
+[* red] Remove the seven screws as circled in picture from the base cover.
[* black] Remove the base cover carefully.
[* icon_note] Save these screws for later.
[* icon_note] Base cover screw type: M2.5x13
[* icon_note] Quantity of M2.5x13: 7
[* icon_note] The screw on the top middle of base cover cannot be removed after unscrewing. But it is okay to remove the base cover.