手順4に変更
- Kyle Smithによって編集
承認済みの編集 : Kyle Smith
- 前
- 後
- 変更なし
手順ライン
| + | [title] Cut along the perimeter of the rear cover |
|---|---|
| + | [* black] Repeat the process of heating and cutting the adhesive along the three remaining sides of the rear cover. |
| + | [* icon_note] You can insert each new opening pick in the gaps created by the opening picks left in each corner. |
| + | [* black] As you proceed, leave an opening pick in each corner to prevent the adhesive from re-sealing. |
| + | [* icon_note] If the rear cover is still attached to the frame after cutting through all four sides, try slicing through the adhesive again with an opening pick. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加