メインコンテンツにスキップ

手順 3 への変更

- Nadia Carrollによって編集

承認済みの編集 : Nadia Carroll

削除
追加
変更なし

手順ライン

[* black] Remove the main plastic body
[* black] Insert the plastic pry baropening tool into the slot on the top (indicated by the spudger) and pry the black part off phonephone.
[* blackicon_note] The bottom piece around the headphone and USB port may get caught, butcaught during this is normal jiggle and prystep. Simply carefully maneuver the case until it is released. The case is relatively flexible which helps here.
[* black] Insert the plastic pry baropening tool into the slot on the top (indicated by the spudger) and pry the black part off phonephone.
[* blackicon_note] The bottom piece around the headphone and USB port may get caught, butcaught during this is normal jiggle and prystep. Simply carefully maneuver the case until it is released. The case is relatively flexible which helps here.