修理を始めるには コミュニティ ストア

手順7に変更

- Andrew Optimus Goldheartによって編集

承認済みの編集 : Andrew Optimus Goldheart

前
後
変更なし

手順ライン

-[* black] Beneath the fan lies the heat sink.
-[* black] Hiding the ICs on the motherboard and leaving us no other choice, we bust out our soldering iron and desoldering wick to free the posts attaching the heat sink in place.
-[* black] Three quickly-melted solder joints free the heat sink and reveal what lies beneath.
+[* black] With the fan out of the way, we're (temporarily) slowed in our journey to the center of the Ouya—the heat sink is soldered in place, obscuring the processor.
+ [* icon_note] According to an Ouya engineer, solder was chosen over clips for mechanical strength, as they were (reasonably) worried about such a small console being knocked around or dropped. Soldering the heat sink to the motherboard proved for a much tougher design, better at surviving drop tests.
+[* black] No trouble for us, we pulled out our trusty soldering iron and desoldering wick and quickly free the heat sink.