手順5に変更
手順ライン
| + | [title] Handle Reassembly |
|---|---|
| + | [* black] Fit the ***right*** handle back onto the white central post. |
| + | [* black] Tuck wires into the handle between screw bosses as shown. Ensure the three wires to the sensor are looped so that rotation of the handle does not tug on the wires. |
| + | [* black] Position in place the center cover, using masking tape to hold in place, if needed. |
| + | [* black] Slide the ***left*** handle in evenly from from the left until base mates up tight around the white center post and the top gives an audible click as it snaps into place. |
| + | [* black] Reinstall the screws in reverse order. |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加