メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順4に変更

Tm21さんによる編集

承認の保留中

変更なし

手順ライン

[* black] UsePop loose the battery with the iPod opening tool to pry under the battery starting from where the removed circuit board was to jarbottom.
[* black] NOTE: Adhesive glue connects
the battery from the adhesive glue connecting it to the device.
[* black]
After getting it loose, use a metal spudger to continue seperatingseparating the battery from the adhesive. Beadhesive.Be careful not to puncture the battery with the spudgerspudger.
[* black] After the battery is separated from the device, place it so the side of the device; theNOTE: The battery willshould still be connected by power cables.
[* black] UsePop loose the battery with the iPod opening tool to pry under the battery starting from where the removed circuit board was to jarbottom.
[* black] NOTE: Adhesive glue connects
the battery from the adhesive glue connecting it to the device.
[* black]
After getting it loose, use a metal spudger to continue seperatingseparating the battery from the adhesive. Beadhesive.Be careful not to puncture the battery with the spudgerspudger.
[* black] After the battery is separated from the device, place it so the side of the device; theNOTE: The battery willshould still be connected by power cables.