メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順3に変更

Tm21さんによる編集

承認の保留中

変更なし

手順ライン

[* black] Use iPod opening tool to lift off/flipflip up the black plastic flap where the ribbon connects to the circuit board.
[* black]
Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cableribbon and an auxiliary black cable)
[* black] Use iPod opening tool to lift off/flipflip up the black plastic flap where the ribbon connects to the circuit board.
[* black]
Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cableribbon and an auxiliary black cable)