手順2に変更
- Kyle Smithによって編集
承認済みの編集 : Kyle Smith
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Insert the pointed end of a spudger underneath the right side of the daughterboard near the screw boss to the left of the USB-C cable. |
|---|---|
| + | [* icon_note] The daughterboard is fitted to the frame by three spring connectors along its bottom edge. |
| + | [* black] Insert the pointed end of a spudger under the right side of the daughterboard near the screw boss. |
| [* black] Use the spudger to pry up and detach the daughterboard from the frame. | |
| [* icon_caution] There are small surface-mounted components underneath the daughterboard. Only insert the spudger as far as necessary to avoid damaging the components. |