メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順4に変更

Walter Galanさんによる編集

承認の保留中

変更なし

手順ライン

[* red] You will seeblack] Carefully pull the hard drive attached to the metal plate. Unplug the ATA/IDEdata cable straight up from the logic board to completely separate the metal plate fromits socket on the logic board.
[* icon_reminder] Don't forget to reconnectDuring reassembly, make sure the hard drive data cable before closingis firmly seated in its socket on the unit back up, orlogic board. Otherwise, during boot-up you will see a flashing ?question mark on your TV when you power it up"?".
[* red] You will seeblack] Carefully pull the hard drive attached to the metal plate. Unplug the ATA/IDEdata cable straight up from the logic board to completely separate the metal plate fromits socket on the logic board.
[* icon_reminder] Don't forget to reconnectDuring reassembly, make sure the hard drive data cable before closingis firmly seated in its socket on the unit back up, orlogic board. Otherwise, during boot-up you will see a flashing ?question mark on your TV when you power it up"?".