手順1に変更
手順ライン
| [* black] Flip the Apple TV over so that the bottom of the unit is facing up. |
| [* black] You need to remove the rubber base to get access to the screws. |
| [* black] Starting at one side of the device, use a hairdryer or low temperature heat gun to soften the adhesive holding the rubber in place. |
| [* black] While the adhesive is still warm, pull up on the lip of the base to detach it from the metal plate. |
| [* black] Continue heating and pulling, slowly, until you have removed the entire |
| [* black] Continue heating and pulling, slowly, until you have removed the entire |
| [* icon_caution] The pad will be hot; take care not to burn your fingers! |