メインコンテンツにスキップ

この手順に変更

- AJ Fiteによって編集

承認済みの編集 : AJ Fite

削除
追加
変更なし

手順ライン

[* black] Remove the tape
[* black] unplug the ribbon cable with twisers
[* black] Then carefully lift/pry the motherboard out of the phone
[* black] While removing the motherboard there is one cable under it that must be disconnected halfway through prying out the motherboard.
[* black] 'NOTE' During this process the mute and the power button (from the top of the phone) may fall out. Do not panic. This is completely normal, simply set the buttons aside in a safe place.