手順4に変更
- Philip Le Richeによって編集
承認済みの編集 : Philip Le Riche
- 前
- 後
- 変更なし
手順ライン
| [title] Optional: Opening the drive | |
| [* black] If you have any difficulty working out where the disk is, or if you're just curious to see inside, you can unscrew the lid. | |
| [* red] You will generally need a Torx screwdriver. There are normally 6 screws around the perimeter of the drive. Remove these. | |
| [* orange] Most laptop drives have one more screw under the label. You will need to locate it by feel, or by viewing it with the light at just the right angle. | |
| - | [* |
| + | [* black] Scrape away the label from around the screw head, using a craft knife or similar. Under the label there is likely to be a layer of foil. Scrape this away as well, revealing the screw head. Remove the screw. |
| [* black] Desktop drives may have more screws, which you will have to locate and remove in the same way. | |
| [* black] Once you have removed all the screws you should be able to prise off the lid. A rubber seal may make it a little reluctant to come off. |