手順2に変更
- hornikmartinrepairによって編集
承認済みの編集 : Kyle Smith
- 前
- 後
- 変更なし
手順ライン
| [title] Separate the two parts | |
| [* icon_caution] To separate the two parts that make up the mouse, help yourself with a card or iFixit Opening Tool, mainly in the front part, and the side that does not have buttons. Then the back, and finally the side where the side button is, be careful when lifting these two, as they require a slight movement. | |
| - | [* icon_caution] Note that both parts are connected inside by a ribbon-type connector. |
| + | [* icon_caution] Note that both parts are connected inside by a ribbon-type connector. Do not abruptly separate them. |
| [* black] Carefully separate the parts | |
| - | [* black] |
| + | [* black] Lift the plastic latch to release the ribbon cable. |