手順1に変更
- Make A. Mendによって編集
承認済みの編集 : Make A. Mend
- 前
- 後
- 変更なし
手順ライン
| [title] Remove Battery, Cap, Sensor | |
| - | [* black] Remove the battery sensor (glued to battery), battery, capacitor. Disconnect motor leads from PCB (marked M+ and M-) |
| + | [* black] Remove the battery sensor (glued to battery), battery, capacitor. |
| + | [* black] Cut motor leads at the PCB (marked M+ and M-). |
| + | [* black] Strip the freshly-cut ends of the motor wires so they can be reconnected in a later step. |