メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Walter Galanさんによる編集

承認の保留中

変更なし

手順ライン

[* red] Remove twothe two 7.2 mm Phillips black screws holdingsecuring the metal silver guide rails forthat hold the laser in place.
[* blue] Unclip the orange ribbon cable from the laser.
[* black] Tip the unscrewed ends of the metal rails up, and the laser will slide out.
[* red] Remove twothe two 7.2 mm Phillips black screws holdingsecuring the metal silver guide rails forthat hold the laser in place.
[* blue] Unclip the orange ribbon cable from the laser.
[* black] Tip the unscrewed ends of the metal rails up, and the laser will slide out.

画像2

削除済み