メインコンテンツにスキップ

手順13に変更

Craig Lloydさんによる編集

承認済みの編集 : Craig Lloyd

変更なし

手順ライン

[title] Remove the controller board
[* red] Use a Phillips screwdriver to remove the 8.5 mm-long8.5 mm-long screw securing the controller board to the hard drive.
[* red] Use a Phillips screwdriver to remove the 8.5 mm-long8.5 mm-long screw securing the controller board to the hard drive.
[* black] Slide the controller board straight off the hard drive to remove it.
[* icon_note] There will be a bit of resistance when removing this board, since it's connected to the hard drive's SATA and power connectors.