メインコンテンツにスキップ

手順 1 への変更

- Apurva Patelによって編集

承認済みの編集 : Apurva Patel

削除
追加
変更なし

手順ライン

[* black] First it is necessary to remove the ribbon cable connecting the control board to the rear circuit board (green) on the camera.
[* black]
This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the pry stickspudger.
[* black] First it is necessary to remove the ribbon cable connecting the control board to the rear circuit board (green) on the camera.
[* black]
This is done by unsnapping the jawbone connector and gently pulling the cable out with tweezers or the pry stickspudger.