手順1に変更
- Bradyn Braithwaiteによって編集
承認済みの編集 : Justin Ogihara
- 前
- 後
- 変更なし
手順ライン
| [* red] Remove the two (2) dummy cards from the laptop. | |
| [* orange] Using a Phillips head screwdriver, unscrew the six (6) screws from the bottom of the laptop. | |
| [* yellow] Unscrew the two (2) screws from the back of the laptop, located at the extreme left and right of the back panel. | |
| - | [* black] Slide bottom cover forward and lift upwards to remove. You may need to use a strong spudger to force a gap along the base edge from the ethernet port on the right, to the kensington port on the left. |
| + | [* black] Slide the bottom cover forward and lift it upwards to remove. |
| + | [* icon_note] You may need to use a strong spudger to create a gap along the base edge - starting from the Ethernet port on the right toward the Kensington port on the left. |