メインコンテンツにスキップ

手順6に変更

- Kristen Gismondiによって編集

承認済みの編集 : Kristen Gismondi

変更なし

手順ライン

-[* black] Run the left side of your new cable through the left earbud housing. Tie a knot that is roughly 1.5cm away from the tip of the exposed wire. Repeat with the right side of the new cable.
+[* black] Run the left side of your new cable through the left earbud housing. Tie a knot that is roughly 1.5 cm away from the tip of the exposed wire. Repeat with the right side of the new cable.
[* icon_note] For most cables, the left side has green/copper wires, while the right side has red/copper wires.