メインコンテンツにスキップ

手順6に変更

- Nicholas Yangによって編集

承認済みの編集 : Nicholas Yang

変更なし

手順ライン

-[* black] Insert wisdom here.
+[* black] Run the left side of your new cable through the left earbud housing. Tie a knot that is roughly 1.5cm away from the tip of the exposed wire. Repeat with the right side of the new cable.
+[* icon_note] For most cables, the left side has green/copper wires, while the right side has red/copper wires.