手順11に変更
- Grace Giusによって編集
承認済みの編集 : Grace Gius
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Reinstall the power supply shroud (Instructions found in Chapter 10.8 of the Respironics V200/Esprit Ventilator Service Manual.) |
|---|---|
| + | [* black] Make sure the red and black wires from TB3 rest inside the shroud slots |
| + | [* black] Make sure the shroud does nor pinch any cables |
| + | [* black] All cable assemblies and wires must be routed between the shroud and the top enclosure wall |
| + | [* black] The black ground wire reattaches to the shroud with the longer screw (near connector TB2) |
画像1
以前の画像はありません
追加