手順5に変更
- Adriana Zwinkによって編集
承認済みの編集 : Adriana Zwink
- 前
- 後
- 変更なし
手順ライン
| [* black] Place a suction cup near the bottom edge of the phone. | |
| - | [* |
| - | [* black] Leave the opening pick in its place at the top left corner to prevent the adhesive from resealing. |
| + | [* icon_note] If the phone's screen is cracked, the suction handle may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction handle in place and allow it to cure so you can proceed. |
| + | [* black] Pull the suction cup upwards and insert an opening pick in the gap between the display glass and the frame. Start to cut the adhesive by sliding the opening pick to the bottom left corner. Leave the opening pick in its place at the top left corner to prevent the adhesive from resealing. |
| [* icon_note] Depending on how old your phone is, creating this initial gap may be very difficult. Here are some things you can try if you're having trouble: | |
| [* black] Repeat the heating and pulling process multiple times to soften the adhesive. | |
| [* black] Use a playing card instead of an opening pick to insert in the gap. | |
| [* black] Try heating and prying at a different location. | |
| [* black] [https://d3nevzfk7ii3be.cloudfront.net/igi/xrtdZWw4FJGFXeOf.full|Use a Jimmy to make the initial entry|new_window=true]. Be careful working with metal tools, as they will scratch the frame and chip the glass screen. |