手順9に変更
- hugh johnstonによって編集
承認済みの編集 : hugh johnston
- 前
- 後
- 変更なし
手順ライン
| + | [* black] 3 x heating elements |
|---|---|
| + | [* black] 2 x Brass dividers |
| + | [* black] 2 x Copper wires |
| + | [* black] 2 x Bolts |
| + | [* black] 6 x Washers |
| + | [* black] 4 x Nuts |
| + | [* black] To remove the heating elements unscrew the bolts with the PH screwdriver whilst holding the nuts with the pliers |
| + | [* black] Once unscrewed the wires and copper dividers are able to be removed. Then simple slide out the heating elements. The elements need to be replaced in the same slots they came from so label them. |
画像1
以前の画像はありません
追加