メインコンテンツにスキップ

手順4に変更

edwardbさんによる編集

承認済みの編集 : edwardb

変更なし

手順ライン

-[* black] With a Digital Multimeter (Volt Meter) set to DC Volts, measure the cell balance. The nickle straps are good testpoints. Note the cell voltages.
+[* black] With a Digital Multimeter (Volt Meter) set to DC Volts, measure the cell balance. The nickle straps are good test points. Note the cell voltages.
[* black] Cell 1: TP6 to CL1
[* black] Cell 2: CL1 to CL2
[* black] Cell 3: CL2 to CL3
[* black] Cell 4: CL3 to CL4
[* black] Cell 5: CL4 to CL5 (Battery Pos)
[* black] The cell voltages should be in the range 3.0V to 4.2V. The cells should all read about the same, say 3.9V. If the cells are more than 0.1V different, then cell imbalance could be a problem for your battery pack.