メインコンテンツにスキップ

この手順に変更

- Evan Grilleyによって編集

承認済みの編集 : Evan Grilley

変更なし

手順ライン

[* black] Open the laptop until it is flat and lay it screen down.
-[* red] Unscrew all ten screws using a Phillips #00 driver on the bottom of the device, eight of which are 9.525 mm screws.
-[* orange] The two bottom corners have shorter screws than the rest, at 4.76 mm.
+[* red] Remove eight 9.6mm Phillips #00 screws from the bottom of the laptop.
+[* orange] Remove two 4.8mm Phillips from the corners of the device.