メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順6に変更

irvbrombergさんによる編集

編集が拒否されました。 : Evan Noronha

変更なし

手順ライン

[* black] After removing the 4 screws that hold the clutch assembly in place, the only thing still holding it in place are two stubby aluminum pegs (just inside the outermost screw holds) and the spring-like stiffness of the clutch assembly. '''There isn't any adhesive.'''
[* black] The objective in this step is to gently and gradually pry the clutch assembly off of those two stubby aluminum pegs. You can use a plastic spudger (as described below), but may find a small straight-bladed screwdriver more convenient, using the adjacent screw holes for leverage .
[* black] To remove the clutch assembly, first insert the flat end of a spudger into the gap between the clutch hinge and the clutch cover where the cables exit.
[* black] While prying the clutch assembly away from the clutch hinge with your spudger, use a plastic opening tool to increase the gap between the clutch cover and the front display bezel.
[* black] Work your way alongOnce the lengthtwo stubby aluminum pegs are clear of the clutch cover to fully separate the adhesiveassembly, it will easily come off.
[* black] Work your way alongOnce the lengthtwo stubby aluminum pegs are clear of the clutch cover to fully separate the adhesiveassembly, it will easily come off.