手順5に変更
- Austin Blakelyによって編集
承認済みの編集 : Austin Blakely
- 前
- 後
- 変更なし
手順ライン
| - | [* red] Use a |
|---|---|
| - | [* black] Disconnect the white and the black network wires. |
| + | [* red] Use a Phillips #00 screwdriver to remove the screw from the network card. |
| + | [* black] Disconnect the white and the black network wires by popping them up from the card with a spudger. |
| [* black] Remove the network card and set it aside. | |
| [* icon_note] The white wire is connected to the MAIN and the black wire is connected to AUX. This is important when reassembling your device. |