メインコンテンツにスキップ

手順4に変更

vet121さんによる編集

承認済みの編集 : Carsten Frauenheim

変更なし

手順ライン

[title] Removing the three 10mm hex nuts
[* black] Remove the three 10mm hex nuts
-[* orange] Use a socket wrench to break loose the nuts and hand twist the nut to remove the nuts.
+[* orange] Use a socket wrench and hand twist to loosen the nuts.
[* icon_caution] Break loose the nut only after knowing the depth of the magnetic strip. It helps properly alight the door during installation later.