メインコンテンツにスキップ

手順3に変更

Dominikさんによる編集

承認済みの編集 : Dominik

変更なし

手順ライン

[title] Removing the Main Electronics
[* black] The single PCB is secured in with 2 standard screws and a ribbon cable which leads to the "display".
[* black] By lifting the tightening cover of the ribbon cable you can remove it.
[* black] By removing the 2 standard screws you can finally completly remove the PCB from the assembly.
[* black] Pay attention to the before mentioned cogwheel. It will also fall out.
+[* black] Additionally there are two plastic pins which transfer button pushes from to the PCB. More for that to come when looking at the PCBs.