手順3に変更
- Rory Clementsによって編集
承認済みの編集 : Rory Clements
- 前
- 後
- 変更なし
手順ライン
| [title] Testing the switch and refitting the plug | |
| [* black] The first picture is the plug, look closely how it locks the switch in. The second picture is how it retains the switch. | |
| - | [* black] Check for debris |
| - | [* black] If all is good refit the |
| - | [* black] Make sure the plug is located properly within the midframe and the switch functions correctly. |
| + | [* black] Check for debris within the switch space. Temporarily relocate the switch and check that it functions correctly, you should see the pins contacting the volume/power ribbon switches. If not you may have another issue. |
| + | [* black] If all is good refit the switch by depressing it on the retaining side and and push the retaining plug back in. |
| + | [* black] Make sure the plug is located properly within the midframe and that the switch functions correctly. |