この手順に変更
- Victoria Yatesによって編集
承認済みの編集 : Victoria Yates
- 前
- 後
- 変更なし
手順ライン
| [* black] ***Then pull off the shift cable’s end cap and loosen the cable pinch bolt with a hex wrench until the cable comes free of the derailleur.*** | |
| - | [* black] ***Remove the clamp from the seat post.*** |
| - | [* black] ***Before installing the new front derailleur, apply some waterproof grease to the mounting bolt.*** |
| + | [* black] ''Some chains have a special connector pin that need replacing if removed, so if you don’t need to remove the chain for cleaning or replacement you can simply undo the derailleur cage’s tail screw and flex the cage open to release the chain. '' |