この手順に変更
- Victoria Yatesによって編集
承認済みの編集 : Victoria Yates
- 前
- 後
- 変更なし
手順ライン
| - | [* black] To install a ***derailleur hanger***, use the hex wrench to loosen and remove connecting bolt on the derailleur. |
|---|---|
| [* black] ''It's fine to let the derailleur dangle from the shift cable while you work.'' | |
| + | [* black] Before installing the replacement hanger, clean off the dropout area with bike cleaner and a rag. Then lubricate both the inside and outside of the frame with bike grease. |