この手順に変更
- Victoria Yatesによって編集
承認済みの編集 : Victoria Yates
- 前
- 後
- 変更なし
手順ライン
| [* black] Unscrew the derailleur from the derailleur hanger by inserting a hex wrench and turning counter-clockwise. ''It's fine to let the derailleur dangle from the shift cable while you work. '' | |
| [* black] Before installing the new derailleur, check to make sure the current*** derailleur hanger*** is in good shape. | |
| - | [* black] Remove the hanger insert from the dropouts on the frame with a hex wrench. Some hangers will have two halves to remove. |
| + | [* black] Remove the ***hanger insert*** from the dropouts on the frame with a hex wrench. Some hangers will have two halves to remove. |
| [* black] Before installing the replacement hanger, clean off the dropout area with bike cleaner and a rag. Then lubricate both the inside and outside of the frame with bike grease. | |
| + | [* black] Install the new hanger. Tighten it into place using the hex wrench. |