メインコンテンツにスキップ

手順4に変更

Kameron Kennedyさんによる編集

承認済みの編集 : Kameron Kennedy

変更なし

手順ライン

[* yellow] Locate the trust rod hex nut.
-[* black] If your fret board is bowing upward towards the strings, loosen the trust rod a quarter to half a turn by turning the hex wrench counter-clockwise.
-[* black] If your fret board is bowing downward, creating a boat shape, tighten the trust rod a quarter to half a turn by turning the hex wrench clockwise.
-[* icon_note] If you are doing this step with the strings on, tighten or loosen the trust rod until the fret board is perfectly flat. If done without the strings on, leave the fret board slightly bowed upward.
+[* black] If your fret board is bowing upward towards the strings, loosen the truss rod by turn by turning the hex wrench a quarter to half turn counter-clockwise.
+[* black] If your fret board is bowing down away from the strings, tighten the truss rod by turning the hex wrench a quarter to half a turn clockwise.
+[* icon_note] If you are following this guide with the strings on, tighten or loosen the trust rod until the fret board is perfectly flat. If you are following without the strings on, leave the fret board slightly bowed upward.