メインコンテンツにスキップ

手順 3 への変更

- Andrew Bookholtによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* icon_caution] Do not put any excessive strain on the inverterLED driver cable ground loop. It is a very thin and delicate wire that is easily broken.
[* black] Disconnect the inverterLED driver cable by pulling its connector away from the socket on the inverter board.
[* black] Remove the inverterLED driver board and set it aside.
[* icon_caution] Do not put any excessive strain on the inverterLED driver cable ground loop. It is a very thin and delicate wire that is easily broken.
[* black] Disconnect the inverterLED driver cable by pulling its connector away from the socket on the inverter board.
[* black] Remove the inverterLED driver board and set it aside.