手順5に変更
- Ian Gasconによって編集
承認済みの編集 : Ian Gascon
- 前
- 後
- 変更なし
手順ライン
- | [* black] Locate the hard drive and the three screws holding it in place. |
---|---|
[* red] Use a Phillips #1 screwdriver (PH1) to remove the two 3.4 mm screws on the sides. | |
[* orange] Use a Phillips #0 screwdriver (PH0) to remove the one 3.3 mm screw at the bottom of the bracket. |