メインコンテンツにスキップ

手順5に変更

- Ian Gasconによって編集

承認済みの編集 : Ian Gascon

変更なし

手順ライン

[* black] Locate the hard drive and the three screws holding it in place.
-[* black] Use a Phillips #1 screwdriver (PH1) to remove the two 3.4 mm screws on the sides.
-[* black] Use a Phillips #0 screwdriver (PH0) to remove the one 3.3 mm screw at the bottom of the bracket.
+[* red] Use a Phillips #1 screwdriver (PH1) to remove the two 3.4 mm screws on the sides.
+[* orange] Use a Phillips #0 screwdriver (PH0) to remove the one 3.3 mm screw at the bottom of the bracket.