メインコンテンツにスキップ

手順3に変更

- Austin Blakelyによって編集

承認済みの編集 : Austin Blakely

変更なし

手順ライン

-[* black] Gently lift the Hard drive and pull it away from the grey connection.
-[* black] Disconnect the cable that is connected to the hard drive by sliding it horizontally away from the connector.
+[* black] Disconnect the cable that is connected to the hard drive by lifting the edge slightly and sliding it horizontally away from the connector.
+[* black] Remove the hard drive.
+[* icon_note] You may need to further remove the metal mounting brackets from your old hard drive then install them on your new hard drive before reinstallation.